Bars & Lounges

Custom Bar & Lounge Furniture Manufacturer

Bar seating takes spills, heavy nights, and constant turnover. We build stools and lounge banquettes that survive it and still read tailored under the lights.

Request a quote or call (310) 817-5489

Seating built for

  • Marriott
  • Hyatt
  • MGM Resorts
  • Hilton
  • LAVOITALIAN RESTAURANT
  • Moxy Hotels
  • Netflix
  • OpenAI
  • Morongo

Spills, heavy nights, low light

Spills, heavy nights, low light. Built for all three.

A bar’s seating is the last thing a guest touches before deciding on one more round — and the first thing that reads tired if it wasn’t built for the job. From our Los Angeles factory we build bar and counter stools, lounge banquettes, tufted sofas and settees, and booth seating for cocktail bars, hotel and rooftop bars, nightclubs, and casino lounges. Built to your drawings in any finish, with hardwood frames and contract-grade foams engineered for nightlife wear and easy reupholstery down the line. Assembled in the USA, any quantity, shipped nationwide. Our bar and lounge work includes Lavo in West Hollywood — see our work.

Upholstered in our Los Angeles factory for bars and lounges nationwide — from LA and Las Vegas to New York, Miami, and Nashville — shipped carton and palletized.

About 2 days
Firm, itemized quote from your plan (business days)
No minimum
One piece or a full project
4–10 weeks
Lead time from approved shop drawings or fabric receipt
TB 117-2013
Compliant foams on hardwood frames, contract-grade

Download the capabilities sheet (PDF)Request finish samples

Spills, heavy nights, low light

Built for the Bar & Lounge Floor

Built for Cocktail Bars · Hotel & Rooftop Bars · Nightclubs & Lounges · Sports Bars · Casino Bars · Private Clubs

  1. i.

    Bar & Counter Stools

    Bar and counter heights with footrests and finishes that take constant use.

  2. ii.

    Lounge Banquettes

    Built-in and freestanding lounge banquettes, any configuration, by the linear foot.

  3. iii.

    Tufted Lounge Seating

    Sofas, settees, and lounge chairs with channeling, tufting, and contrast welt.

  4. iv.

    Nightlife-Tough

    Hardwood frames and TB 117-2013 foams built for heavy traffic and easy cleaning.

  5. v.

    Your Concept, Your Finish

    COM/COL upholstery and matched wood or metal bases to your brand.

  6. vi.

    Nightclub & VIP Booths

    VIP booths, upholstered perimeter seating, and banquette runs for club floors — spill-rated materials that hold up under the lights.

Send us your spec

Bar & Lounge Seating

Every piece is built to order: your dimensions, your fabric or leather, your finish.

Prefer to start from a design? Browse our catalog, then have it built to your spec.

The making of a bar room

How a plan becomes a bar room.

01Chapter one

Your plan, in any form.

A floor plan, a CAD file, a reference photo, or a sketch with measurements. Mark the quantities, the fabric or finish you have in mind, and the date you need it. That is enough for us to price it.

Firm, itemized quote in about 2 business days.
window col. aisle outlet door wall A wall B seating along the window wall?
Fig. 1Enough to quote from: two walls, a window, a column and where the tables fall. (Illustration.)
02Chapter two

Shop drawings. Nothing is cut until you sign.

Your plan becomes CAD shop drawings, included with your order: every dimension, profile and finish. You mark them up, we revise, you approve. Sending your own fabric or leather? The yardage is confirmed right on the drawings, before you order a roll.

COM / COL yardage confirmed on the drawings.
Plan A A RUN LENGTH Front elevation SEAT HEIGHT OVERALL HEIGHT Section A–A SEAT DEPTH BACK · CHANNEL TUFTED CONTRAST WELT SEAT · TB 117-2013 FOAM HARDWOOD FRAME TOE-KICK
Drawn byTrend Contract Furnishings
StatusFor your approval
Approvedyour initials here
Fig. 2How a shop drawing reads, shown here for a booth: plan, front elevation and a section through the seat. Drawn as an illustration; your set carries every dimension.
03Chapter three

Built by hand in Carson.

Frame
Hardwood, built and finished under our own roof
Foam
TB 117-2013 compliant
Grade
Commercial / contract, made for nightly service
Setting
Indoor or outdoorWeather-appropriate frames, foams and outdoor-rated materials
Fabric
COM / COL from any mill
Details
On requestChannel or button tufting, contrast welt, show-wood, metal or wood bases, power and USB
Built to
Be reupholstered, not replaced
Origin
Made in Los Angeles. Assembled in the USA
Craft details · illustrative
Leather pulled tight and stapled to a booth back.
A tufted seat, smoothed by hand.
Finish sprayed on show-wood.
04Chapter four

Delivered and installed, coast to coast.

When the pieces are built, they travel. We deliver and install nationwide, or ship carton or palletized freight to your site or your receiver, whichever the job calls for.

Lead time: 4–10 weeks from approved shop drawings.

Chapter one starts with your plan. A floor plan, a sketch with measurements, or a photo. The firm quote comes back in about 2 business days.

Send your planor call (310) 817-5489

Chapter one starts here

Send the plan. Get a firm number back.

  1. Send a plan, a spec, a sketch with measurements, or a photo.
  2. Firm, itemized quote in about 2 business days, no minimum order.
  3. Shop drawings to approve before anything is cut.
  4. Built in 4–10 weeks, then delivered and installed nationwide.

Rather talk it through? (310) 817-5489

Quote request

Send your plan or spec. Get a firm quote in about 2 business days.

Attach a plan, spec sheet, or photo (optional)Drag a file here or browse. PDF, JPG, or PNG. A sketch with measurements is enough.

No minimum order. Or call (310) 817-5489

Rooms we’ve seated.

Real installs, not renderings. Tap a photo to enlarge.

No. I

Silver Linings

New York

Seen here
Velvet lounge seating, New York
Built
Carson, Los Angeles

No. II

Lavo

West Hollywood

Seen here
Upholstered dining seating under the brick vault
Built
Carson, Los Angeles

Questions buyers ask first

Something not covered here? Call (310) 817-5489 and ask us directly.

Further reading

Do you build custom bar stools and counter stools?

Yes — bar and counter heights, upholstered or show-wood, with footrests and finishes chosen for constant use.

Can you build lounge banquettes and booths for a bar?

Yes — built to your plan in any configuration, priced per linear foot, with tufting and detailing to match your concept.

Is the seating durable enough for nightlife?

Yes — hardwood frames and TB 117-2013 foams engineered for heavy traffic, with construction that reupholsters easily.

Can you match our bar’s look?

Yes — COM/COL upholstery, custom wood and metal finishes, and detailing worked out at shop-drawing stage.

Do you build nightclub furniture?

Yes — VIP booths, upholstered perimeter and banquette seating, bar stools, and lounge pieces for nightclubs and club lounges, built to your plan with cleanable, nightlife-rated materials.

What is the lead time on bar and lounge seating?

Standard lead time is 4–10 weeks from approved shop drawings or fabric receipt, depending on construction and quantity.

How fast will I get a quote?

Typically within a couple of business days once we have your concept, drawings, or specs — with a firm timeline included.

Is there a minimum order?

No — from a single lounge banquette to a full bar program, there’s no minimum.

Are you made in the USA?

Every piece is assembled in the USA — upholstered by hand in our Los Angeles factory and shipped nationwide.

Have a plan, a spec, or a photo of the piece?

Send it today. A firm, itemized quote comes back in about 2 business days, with no minimum order.

Request a quoteCall (310) 817-5489
Request a QuoteCall