Try “sofa”, “banquette”, “Moxy”, “casino”, “walnut”…
Custom Upholstery & COM
Every piece we make is cut, sewn, and upholstered on our own floor in Carson. Send your fabric from any mill and we confirm the yardage before a roll is ordered.
Seating built for
Cut, sewn, tied, finished
Your fabric arrives here on a roll and leaves as finished seating — cut, sewn, and pulled tight by the same hands that built the frame underneath it. Every piece we make — banquettes, booths, lounge seating, dining chairs, sofas, ottomans, headboards — is upholstered in-house on frames we build ourselves, so the upholstery program is the heart of the factory, not an outsourced step. We are a COM/COL house: send your fabric or leather from any mill and we confirm yardage on your shop drawings before you order a single roll. No showroom markup, no catalog constraints — a workshop working from your specification.
Upholstered in our Los Angeles workshop for commercial projects nationwide — designers send COM from every market, and we build and deliver to your site or receiver.
Cut, sewn, tied, finished
Customer’s Own Material and Customer’s Own Leather welcome on any piece. Yardage confirmed on your shop drawings before fabric is ordered.
Traditional hand-tied spring construction where the piece calls for it — the seat quality hospitality furniture is judged by.
Channeling, tufting, decorative stitching, and contrast welt — matched to your drawings or worked out with you at shop-drawing stage.
Foams and fills meet California TB 117-2013, with custom densities and fills specified per use.
Hardwood frames built and finished under the same roof — exposed show-wood, matched stains, and metal bases.
Standard, serviceable construction so commercial pieces can be refreshed years later instead of replaced.
Every piece is built to order: your dimensions, your fabric or leather, your finish.
Troy OttomanOttomans
Kay ChairLounge Chairs
Bridgerton ChairLounge Chairs
Lucky SofaSofas & Chaise
Eddie Tower OttomanOttomans
Onyx Tufted SofaSofas & ChaisePrefer to start from a design? Browse our catalog, then have it built to your spec.
The making of a piece
A floor plan, a CAD file, a reference photo, or a sketch with measurements. Mark the quantities, the fabric or finish you have in mind, and the date you need it. That is enough for us to price it.
Your plan becomes CAD shop drawings, included with your order: every dimension, profile and finish. You mark them up, we revise, you approve. Sending your own fabric or leather? The yardage is confirmed right on the drawings, before you order a roll.
When the pieces are built, they travel. We deliver and install nationwide, or ship carton or palletized freight to your site or your receiver, whichever the job calls for.
Chapter one starts with your plan. A floor plan, a sketch with measurements, or a photo. The firm quote comes back in about 2 business days.
Chapter one starts here
Rather talk it through? (310) 817-5489
Real installs, not renderings. Tap a photo to enlarge.
No. I
Anaheim
No. II
New York
Something not covered here? Call (310) 817-5489 and ask us directly.
Yes — COM (Customer’s Own Material) and COL (Customer’s Own Leather) are welcome on every piece. Send your fabric details and we confirm the required yardage on your shop drawings.
Yes — physical wood-finish and material samples ship from our Los Angeles factory within 2–3 business days, no quote required, so you can check your COM against our finishes before the mill order.
Customer’s Own Material / Leather — you supply the fabric or hide from your preferred mill, and we build with it. It gives designers full control of the textile spec while we handle construction.
Yes. Channeling, tufting, decorative stitching, and contrast welt are all done in-house — send a drawing or a reference photo and we detail it at shop-drawing stage.
Yes — foams and fills meet California TB 117-2013, with densities specified per use for daily commercial wear.
Yes. We build with standard, serviceable construction so booths and seating can be refreshed years down the line instead of replaced.
Standard lead time is 4–10 weeks from approved shop drawings or fabric receipt, depending on construction and quantity. Your COM/COL has to arrive before upholstery begins, so routing fabric promptly protects the schedule.
Typically within a couple of business days once we have your specs, drawings, or a reference to work from — with a firm lead time included.
No — from a single upholstered piece to a full production run, at the same standard.
From our Los Angeles workshop nationwide, and internationally on request.
Send it today. A firm, itemized quote comes back in about 2 business days, with no minimum order.
