Curved and Round Banquette Dimensions

How big a round booth has to be, what table fits inside it, and how many people a half-circle or three-quarter circle really seats, with the math so you can check your own plan.

Updated November 10, 2026 · 6 min read · Written by Bryan Wolff · Reviewed by Luis Aparicio

Round booth sizes at a glance

An 8-foot (96-inch) half-circle booth seats about 4 people around a 42–48 inch round table. The same diameter drawn as a three-quarter circle seats 6 to 7. There is no published standard for round booths, so the table below is planning math rather than a rule.

Overall diameterClear inside diameterRound tableHalf circle: seat length / seatsThree-quarter circle: seat length / seats
84 in (7 ft)36 in30–36 in85 in / 3127 in / 5
96 in (8 ft)48 in42–48 in104 in / 4155 in / 6–7
108 in (9 ft)60 in54–60 in122 in / 5184 in / 7–8
120 in (10 ft)72 in66–72 in141 in / 5–6212 in / 8–9

The table assumes a seat module 24 inches deep (about 6 inches of back and 18 inches of seat), measures seat length along the middle of the seat, and allows 22–24 inches per diner.

Measure seat length along the dashed line through the middle of the seat Clear inside 48 in Round table Overall diameter 96 in
A half-circle booth in plan view, drawn to scale. Planning guidance only; your shop drawings set the final dimensions.

For projects

Trend Contract Furnishings builds curved banquettes and round booths to your radius for restaurants, hotels, bars and casinos, and for the designers and purchasing teams who specify them. Firm quote in about 2 business days, shop drawings included, priced per linear foot.

One round booth? It is built to order like any project: a firm price in about 2 business days, shop drawings to approve, then 4–10 weeks in our Los Angeles factory.

How to count the seats on a curve

Seat length on a curve is 3.14 × the radius at the middle of the seat × the sweep in degrees ÷ 180. Divide that by 22–24 inches to get diners.

For a 96-inch booth, the outer radius is 48 inches. Take off 15 inches, which is the back plus half the seat, to get a 33-inch radius at the middle of the seat. A half circle sweeps 180 degrees, so the seat runs 3.14 × 33 = about 104 inches, or four diners at 24 inches each. A three-quarter circle sweeps 270 degrees, so it runs about 155 inches.

Where you measure matters on a tight curve. The front edge of the seat is shorter than the middle, and the back is longer, so measuring along the back overstates capacity. Gentle curves seat about the same as straight runs.

Choosing the table

A round booth wants a round table, sized from the clear inside diameter. That diameter is the overall size minus 24 inches on each side. A table from 6 inches under that figure up to the full figure keeps guests within reach of the table while leaving room to slide in, and a center pedestal keeps legs out of the way.

A three-quarter circle closes more of the ring, so guests have one way in. Check the width of the opening on the plan, because the guest in the middle has to get out past everyone else. Accessible seating is planned separately: see ADA restaurant seating clearances.

Curved walls and serpentine runs

A banquette that follows a curved wall is sized by the wall’s radius, not by a catalog diameter. If you only have a chord and a rise, the radius is the chord squared ÷ (8 × the rise), plus half the rise. A wall that is not a true arc is better measured as a template or as field dimensions.

Ask how the run will break into sections for freight, doors and elevators, because your shop drawings show every joint. Channeled backs also fan on a curve, with the channels narrowing toward the inside, so the fabric layout belongs on the drawing as well. The COM yardage chart covers fabric.

What to send for a curved booth quote

Send the overall diameter or the wall radius, the sweep, the back height, and the table size. A sketch with those numbers is enough to quote.

  • Half circle, three-quarter circle, or the length of the arc
  • Seat height and back height
  • Width of the opening
  • Table diameter and base
  • Fabric or leather, or COM/COL
  • Number of booths and the delivery address

A curve adds fabrication per foot compared with a straight run, and your quote shows it. The booth and banquette spec sheet lists the rest of what a bidder needs.

For projects

Drawing a curved booth?

For restaurants, hotels, bars, casinos, designers and purchasing teams: send the radius or a sketch and the table size. A firm quote comes back in about 2 business days, priced per linear foot, with shop drawings included.

Frequently Asked Questions

How many people fit in a half-circle booth?

An 8-foot (96-inch) half-circle booth seats about 4 people. A 10-foot booth seats 5 to 6. That is at 22–24 inches per diner, measured along the middle of the seat.

How big does a round booth need to be for 6 people?

Plan about 96 inches overall as a three-quarter circle, or about 120 inches as a half circle.

What is the difference between a half-circle and a three-quarter-circle booth?

A half circle sweeps 180 degrees and is open across its full width. A three-quarter circle sweeps 270 degrees, seats about half again as many people at the same diameter, and leaves one narrower way in.

What size table goes in a round booth?

Start from the clear inside diameter, which is the overall diameter minus 24 inches on each side. A 96-inch booth has 48 inches clear and usually takes a 42–48 inch round table.

How do you measure a curved banquette?

Measure the overall diameter or the wall radius, and how far around the curve runs. For capacity, measure along the middle of the seat rather than along the back.

Do curved banquettes cost more than straight ones?

A curve adds fabrication per foot compared with a straight run, and your quote shows it. Trend quotes curved runs per linear foot, and a sketch with the wall lengths and table sizes is enough to start.

Let's Build Together

Let's Build Something Worth Sitting In

Tell us what you need made and we'll quote it — a firm price, a lead time, and CAD shop drawings for approval before anything is cut. You'll hear back within one business day, with the firm quote typically following within about two, straight from our Los Angeles workshop. Need a detailed estimate? Use the full quote request to send specs and reference images.

16520 Avalon Blvd, Carson, CA 90746
Mon–Thu, 8:00am – 4:00pm PT
Fri, 8:00am – 3:00pm PT
Closed weekends

Contact Us

A quick note to get the conversation started — we reply within one business day, and a firm quote typically follows within about two.

Attach a photo or drawing (optional)

Sent straight to our team — we usually reply within one business day.