Commercial Seating Dimensions, Measured Across Our Catalog
How big commercial bar stools, dining chairs, lounge chairs, sofas and benches really are, taken from the published sizes of the pieces we build rather than from a rule of thumb.
Typical sizes by type of seat
In our catalog, a typical commercial bar stool is about 20 inches wide and 20 inches deep, a dining chair about 22 inches wide and 24 inches deep, a lounge chair about 30 inches wide and 33 inches deep, and a sofa about 84 inches wide and 35 inches deep.
| Type | Designs measured | Overall width | Overall depth | Overall height |
|---|---|---|---|---|
| Bar and counter stools | 15 | 18.5–22 in | 20–22 in | 34.5–38.5 in |
| Dining chairs | 28 | 21–24 in | 22.5–25.5 in | 32–35 in |
| Lounge chairs | 42 | 28–33 in | 30–34.5 in | 30–35 in |
| Sofas and chaises | 24 | 72–94.5 in | 34–37 in | 30–33 in |
| Benches | 14 | 54–72 in | 20–24 in | 18–24 in |
| Ottomans | 12 | 20–25.5 in | 20–25.5 in | 17.5–20 in |
| Banquettes | 20 | 72–116 in | 28–39 in | 32–36 in |
Each range is the middle half of the designs in that category, from the sizes published in our catalog in November 2026, leaving out two entries whose listed sizes look like typing errors. They show what commercial pieces measure, not what yours has to, because every piece here is built to order.
For projects
Trend Contract Furnishings builds commercial seating to these sizes, or to yours, for restaurants, hotels and casinos, and for the designers and purchasing teams who specify them. Firm quote in about 2 business days, shop drawings included.
Commercial seating →Request a quote →
Just a few pieces? There is no minimum. One piece is built to order like a full project: a firm price in about 2 business days, shop drawings to approve, then 4–10 weeks in our Los Angeles factory.
Seat heights by surface
Seat height follows the surface: about 17–19 inches for a 30-inch dining table, 24–26 inches for a 34–36 inch counter, and 28–30 inches for a 40–42 inch bar. Overall height, in the table above, is measured to the top of the back, so it says little about whether a seat fits a table.
Measure the real surface before ordering. Bars get built at 41, 43, even 45 inches. Bar height vs. counter height has the full chart.
Bar stool size and spacing
Allow 26–30 inches of bar per stool, center to center, with at least six inches between seats. Stools with arms or swivels need the top of that range. There is no universal stool width, so take it from the actual design: ours run 18.5–22 inches wide for most models, and a 10-foot bar usually takes four stools, or five if they are trim and armless. Slot seats are set to the machine rather than a bar, as casino slot chair specifications explains.
Dining chair size and table clearance
A dining chair needs about 10–12 inches between the seat and the underside of the table, which is why a 17–19 inch seat suits a 30-inch table. Armchairs add a second check, because the arm has to clear the table edge or apron if the chair is meant to tuck in. Types of restaurant chairs covers the styles.
Sofa and bench sizes
Sofas in our catalog mostly run 72–94.5 inches wide and 34–37 inches deep, and benches 54–72 inches long and 20–24 inches deep. Most backless benches sit at 18–19 inches.
The number that catches people out on a sofa is access. Check the elevator, the door and the turn in the hallway against the sofa’s depth and height before you settle on a length, and ask for a sofa to be built in sections if it will not make the turn.
How to read a size on a spec sheet
Sizes are listed width by depth by height, and they describe the outside of the piece.
- W (overall width). Widest point, usually across the arms.
- D (overall depth). Front to back, including any lean in the back.
- H (overall height). Floor to the top of the back.
- SH (seat height). Floor to the top of the seat, which is the figure to match to a table or bar.
- AH (arm height). Floor to the top of the arm, which matters at a table.
The final sizes on a custom order are the ones on your shop drawings. What to send for a quote lists what to include.
For projects
Need a different size?
For restaurants, hotels, casinos, designers and purchasing teams: send the dimensions, the quantity and the fabric. A firm quote comes back in about 2 business days, with shop drawings included.
Frequently Asked Questions
What are standard bar stool dimensions?
A bar stool seat sits about 28–30 inches high and a counter stool about 24–26 inches high. Across our catalog, stools run about 18.5–22 inches wide, 20–22 inches deep and 34.5–38.5 inches tall overall.
How wide is a commercial dining chair?
Most in our catalog are 21–24 inches wide and 22.5–25.5 inches deep, with a seat about 17–19 inches high.
How wide is a commercial sofa?
Most in our catalog run 72–94.5 inches wide, 34–37 inches deep and 30–33 inches high. Every sofa is built to order, so the width is set to your room.
What are standard bench dimensions?
Benches in our catalog mostly run 54–72 inches long and 20–24 inches deep, and most backless benches sit at 18–19 inches.
What is the difference between overall height and seat height?
Overall height runs from the floor to the top of the back. Seat height runs from the floor to the top of the seat, and it is the figure to match to a table or bar.
Is there an official standard for commercial seating sizes?
No single standard sets them. The ADA regulates accessible dining surfaces and BIFMA standards cover structural durability, while seat sizes come from production practice and each project’s drawings.